BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Shuswap Makerspace - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://shuswapmakerspace.ca
X-WR-CALDESC:Events for Shuswap Makerspace
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Vancouver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260121T180000
DTEND;TZID=America/Vancouver:20260128T210000
DTSTAMP:20260411T084307
CREATED:20251105T223850Z
LAST-MODIFIED:20260319T180205Z
UID:1030-1769018400-1769634000@shuswapmakerspace.ca
SUMMARY:Solar Solutions
DESCRIPTION:NEW CLASS ~ Solar Solutions – For Your RV!\n \nHave you ever wondered what it would take to put a solar panel or two onto your living space? \nJoin Carl for an informative 2 session class to find out just that\, from the planning and design to monitoring and maintenance. This class will be based on the focus of RV’s and trailers\, however the information can be related to larger buildings as well! \nEnergy independence for off grid adventures\, reducing energy costs and reliance on generators\, and allowing extended stays in remote locations are just some of the benefits of adding solar panels to your recreation vehicle! \nThis workshop will take place over 2 evening sessions – Wednesday January 21st and Wednesday January 28th from 6pm-9pm in the Innovation Center Boardroom (220 Shuswap St. NE Salmon Arm – Just look for the brightly colored building!) \nDay 1 will cover: \n~Introduction & Planning\n~System Components & Design\n~Informal Discussion \nDay 2 will include: \n~Hands-On Installation\n~Monitoring & Maintenance\n~Wrap-Up & Q&A \n  \n***Register soon as space is limited to 15 people!*** \n**Minimum of 3 Students to run the course** \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/solar-solutions/
LOCATION:Innovation Center Boardroom\, 220 Shuswap St. NE\, Salmon Arm\, BC\, V1E4N2\, Canada
CATEGORIES:Solar 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2025/11/The-Best-Solar-Solution-for-Your-RV-5-e1764718240123.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260125T090000
DTEND;TZID=America/Vancouver:20260127T203000
DTSTAMP:20260411T084307
CREATED:20260108T192647Z
LAST-MODIFIED:20260319T175734Z
UID:1250-1769331600-1769545800@shuswapmakerspace.ca
SUMMARY:LASER Cutter 101
DESCRIPTION:LASER CUTTER 101 COURSE \n– 2 Part Series – \nSunday January 25\, 2026 9am-2:30pm & Tuesday January 27\, 2026 6:00pm-8:30pm \n  \nHere’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine\, and learn all the capabilities of this amazing tool. What are you going to create?! \n  \nSession 1 – 6 hours with an hour break for lunch \n-In this class\, you will learn the basics of the machine\, safe operation\, and designing for the laser. Knowledge with Windows is required\, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice. \nSession 2 – 2 hours \n-In this second session you will use the laser to print out a project that you have designed for yourself. ( Valentine Theme) \n  \n**This is a certification class\, so once complete\, you can create your own projects and use the space on a drop-in\, monthly\, or annual membership basis! \nThis workshop is led by Pat Shea \n  \nThis course runs over 2 days – Sunday January 25\, 2026 9am-2:30pm & Tuesday January 27\, 2026 6:00pm-8:30pm \n  \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux.
URL:https://shuswapmakerspace.ca/event/laser-cutter-101-3/
CATEGORIES:Laser Cutter 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Laser-Cutter-101-8.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260129T160000
DTEND;TZID=America/Vancouver:20260129T190000
DTSTAMP:20260411T084307
CREATED:20251211T222919Z
LAST-MODIFIED:20260319T175207Z
UID:1189-1769702400-1769713200@shuswapmakerspace.ca
SUMMARY:Intro to 3D Printing
DESCRIPTION:INTRO TO 3-D PRINTING: \n \n~ Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers utilizing our memberships and drop in. \n\nThis workshop is led by electronics enthusiast Kyrel Silva.\n\nThe fee is $100. Ages 10+ (Note: Youth members must be 12+ to purchase a Makerspace Membership). \nThursday\, January 29th from 4PM – 7PM at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 4 people!*** \n**Minimum of 3 Students to run the course** \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/intro-to-3d-printing-5/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:3D printing 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2025/12/Intro-to-3D-Printing-4-e1765492412548.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260204T100000
DTEND;TZID=America/Vancouver:20260204T140000
DTSTAMP:20260411T084307
CREATED:20260120T222653Z
LAST-MODIFIED:20260319T175152Z
UID:1372-1770199200-1770213600@shuswapmakerspace.ca
SUMMARY:Pen Making Class
DESCRIPTION:Wood Lathe- MAKE A PEN \n \nIn this course you will learn how to make a pen: \n\nprepare a wooden blank which will become the pen barrel\nturn a pen barrel blank on the lathe to the desired shape\nfinish the wooden pen barrel to a smooth\, sheer look and feel\nassemble the finished pen\nfind resources and supplies for more pen projects\n\nEach participant will leave the workshop with a finished Maple Leaf style pen. \nAges 13+ (Under 16 must have a parent supervisor attend with them) \nThis is not a lathe certification course. You will learn how to safely operate the lathe as an introduction to this fun hobby. \nInstructor: D’Arcy McLeod \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. \nThursday\, November 13th from 12pm-3pm\, at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n**Register soon as space is limited to 2 people!** \nMinimum 2 people to run the course.
URL:https://shuswapmakerspace.ca/event/pen-making-class/
CATEGORIES:Woodshop Pen Making 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Pen-Making-Class-4.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260204T153000
DTEND;TZID=America/Vancouver:20260204T170000
DTSTAMP:20260411T084307
CREATED:20260119T211137Z
LAST-MODIFIED:20260319T175643Z
UID:1336-1770219000-1770224400@shuswapmakerspace.ca
SUMMARY:Youth Suet Feeder - " Wood working for Kids made simple"
DESCRIPTION:Classroom presentation use puppets and nesting boxes or feeders local birds and their natural history. This is followed up with an additional presentation on tool use and safety. I remain on site during the assembly process to assist students. \n\n\n\n\n\n\n\n\n\n\n\nGet ready for a hands-on\, giggle-filled workshop where creativity and nature come together! Kids will have a blast building their very own suet feeder\, learning how to help local birds\, and getting a little messy along the way. With simple tools\, fun materials\, and lots of encouragement\, this workshop is all about making\, learning\, and feeling proud of something they can take home and use right away. Perfect for curious kids who love to create and care for nature. 🐦✨ \n\n  \n\n\n\n\n\n\n\n\n\n\nSuet house will be provided. \nAges: 8-15 Years old \n******Pre-registration is required.***** \nThis class will take place Feb 4 2026 – 3:30pm-5Pm  at the Shuswap Makerspace. \nLocated at 220 Shuswap St. NE Salmon Arm\, BC. Bottom of the brightly colored Innovation Center. \n**Limit of  15 people. (Minimum of 10 people to run the class) \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/youth-suet-feeder-wood-working-for-kids-made-simple/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:woodshop kids
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260207T090000
DTEND;TZID=America/Vancouver:20260207T090000
DTSTAMP:20260411T084307
CREATED:20260119T232144Z
LAST-MODIFIED:20260319T175042Z
UID:1345-1770454800-1770454800@shuswapmakerspace.ca
SUMMARY:Woodworking 101
DESCRIPTION:Woodshop 101 – Build A Lantern \n\nFamiliarize yourself with the Wood Shop and its resources.\nIntroduce yourself to the machines and power tools that you are most likely to use.\nDemonstrate how to use those machines and power tools safely.\nGet hands-on experience in operating the machines and power tools safely.\nLearn safety rules including\, E STOP\, first aid kit\, eye wash station\, fire extinguisher and emergency exits.\n\nThis workshop is led by Dave Crandell \nYou will make a lantern as part of the class and the wood is included in the cost. \nUpon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis! \nOpen to everyone 16 years and older \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle. \nSaturday February 9am-3pm  (1 hour lunch break)\,  at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nCheck out our memberships and everything Shuswap Makerspace here.
URL:https://shuswapmakerspace.ca/event/woodworking-101/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Brown-Woodworking-Workshop-Instagram-Post-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260208T090000
DTEND;TZID=America/Vancouver:20260210T203000
DTSTAMP:20260411T084307
CREATED:20260108T192804Z
LAST-MODIFIED:20260319T175023Z
UID:1257-1770541200-1770755400@shuswapmakerspace.ca
SUMMARY:Laser Cutter 101 - 2 Part Series
DESCRIPTION:LASER CUTTER 101 COURSE \n– 2 Part Series – \nSunday Feb 8\, 2026 9am-2:30pm / Tuesday 10\, 2026 6pm-8:30pm. \nHere’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine\, and learn all the capabilities of this amazing tool. What are you going to create?! \n  \nSession 1 – 6 hours with an hour break for lunch \n-In this class\, you will learn the basics of the machine\, safe operation\, and designing for the laser. Knowledge with Windows is required\, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice. \nSession 2 – 2 hours \n-In this second session you will use the laser to print out a project that you have designed for yourself. ( Valentine Theme) \n  \n**This is a certification class\, so once complete\, you can create your own projects and use the space on a drop-in\, monthly\, or annual membership basis! \nThis workshop is led by Pat Shea \n  \nThis course runs over 2 days – Sunday Feb 8\, 2026 9am-2:30pm / Tuesday 10\, 2026 6pm-8:30pm. \n  \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux.
URL:https://shuswapmakerspace.ca/event/laser-cutter-101-4/
CATEGORIES:Laser Cutter 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Laser-Cutter-101-10-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260210T093000
DTEND;TZID=America/Vancouver:20260210T180000
DTSTAMP:20260411T084307
CREATED:20260127T201603Z
LAST-MODIFIED:20260319T175422Z
UID:1410-1770715800-1770746400@shuswapmakerspace.ca
SUMMARY:Valentine’s-Themed Gift Bag Sewing Workshop (Two sessions: 9:30 AM–12:00 PM and 3:30 PM–6:00 PM)
DESCRIPTION:Make it a girls’ morning or afternoon\, friends’ morning/afternoon\, or a parents-and-kids activity! \n Come sew together and create something fun—give it as a handmade gift or keep it for yourself. It’s a great way to learn a new skill and enjoy some creative time together. \nInstructor – Linda Wooster\, retired Home Economics teacher and award-winning seamstress \nIn this class you will \n\n learn the parts of a sewing machine and what each part does\n practice using the machine to sew straight seams\n construct a simple shopping bag from your choice of fabric\nAll materials and sewing machines will be provided.\nOpen to Ages 10+\n\nPre-registration is required. \n*****The class runs February 10 at the Shuswap Makerspace\, Two sessions: 9:30 AM–12:00 PM and 3:30 PM–6:00 PM**** \nLocated at 220 Shuswap St. NE Salmon Arm\, BC. Bottom of the brightly colored Innovation Center. \nLimit of 4 people per Session. (Minimum of 2 people to run the class) \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/valentines-themed-gift-bag-sewing-workshop/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Sewing 101
ATTACH;FMTTYPE=image/jpeg:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/IMG_5252-scaled-e1769544428725.jpeg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260212T180000
DTEND;TZID=America/Vancouver:20260212T203000
DTSTAMP:20260411T084307
CREATED:20260117T003727Z
LAST-MODIFIED:20260319T175006Z
UID:1325-1770919200-1770928200@shuswapmakerspace.ca
SUMMARY:Metal Lathe 101
DESCRIPTION:Metal Lathe 101 certification course is designed for home hobbyists\, technicians\, or persons doing small repair work. \nIf you have always wanted to learn to make your own parts on a metal lathe\, this course is a good start. If you are thinking of getting a lathe or already have a lathe but need some guidance\, this course will teach you proper use\, help familiarize you with related terminology\, and give you a better understanding of the metal lathe’s capabilities. \nIntroduction to the Metal Lathe will include\, but is not limited to: \n\nShop safety\nLathe basics\nCutting tools and techniques\nCutting speeds and feeds\n\nThis course will be a prerequisite for other metal lathe courses and is the certification course for unsupervised use of the lathe in the Shuswap Makerspace. Please wear closed-toe shoes\, have hair tied back\, and avoid loose clothing and jewelry. \nThe course has 3 modules: Introduction to the metal lathe\, basic drilling and tapping\, basic threading\, and other operations. \nInstructor: Pat Shea \nCost: $225 \nAges: 16 & up \nThis course runs over 3 days – Thursday  February  12\, 19 and 26 2026 6:00pm-8:30pm \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux. \n 
URL:https://shuswapmakerspace.ca/event/metal-lathe-101/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Metal Lathe 101
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260219T160000
DTEND;TZID=America/Vancouver:20260219T190000
DTSTAMP:20260411T084307
CREATED:20260120T214120Z
LAST-MODIFIED:20260319T174811Z
UID:1363-1771516800-1771527600@shuswapmakerspace.ca
SUMMARY:3D Printing
DESCRIPTION:Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers utilizing our memberships and drop in. \n\nThis workshop is led by electronics enthusiast Kyrel Silva.\n\nThe fee is $100. Ages 10+ (Note: Youth members must be 12+ to purchase a Makerspace Membership). \nThursday\, Feb 19 4PM – 7PM at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 4 people!*** \n**Minimum of 3 Students to run the course** \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/3d-printing/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:3D printing 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Intro-to-3D-Printing-5.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260221T110000
DTEND;TZID=America/Vancouver:20260221T123000
DTSTAMP:20260411T084307
CREATED:20260126T215025Z
LAST-MODIFIED:20260210T191310Z
UID:1396-1771671600-1771677000@shuswapmakerspace.ca
SUMMARY:Youth Suet Feeder – ” Wood working for Kids made simple”
DESCRIPTION:  \n  \n \n\nGet ready for a hands-on\, giggle-filled workshop where creativity and nature come together! Kids will have a blast building their very own suet feeder\, learning how to help local birds\, and getting a little messy along the way. With simple tools\, fun materials\, and lots of encouragement\, this workshop is all about making\, learning\, and feeling proud of something they can take home and use right away. Perfect for curious kids who love to create and care for nature.  \n\n  \nSuet house will be provided. \nAges: 8-15 Years old \n******Pre-registration is required.***** \nThis class will take place Feb 21 2026 – 11am -12:30pm  at the Shuswap Makerspace. \nLocated at 220 Shuswap St. NE Salmon Arm\, BC. Bottom of the brightly colored Innovation Center. \n**Limit of  15 people. (Minimum of 10 people to run the class) \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/youth-suet-feeder-wood-working-for-kids-made-simple-2/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/t-3-e1769464050201.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260228T100000
DTEND;TZID=America/Vancouver:20260228T150000
DTSTAMP:20260411T084307
CREATED:20260114T221824Z
LAST-MODIFIED:20260114T221824Z
UID:1313-1772272800-1772290800@shuswapmakerspace.ca
SUMMARY:***Repair Cafe***
DESCRIPTION:Mark your calendars for the next Repair Cafe!\n\n\n\n~Toss it? No way!~\n\n\n\nDo you have a broken lamp\, small appliance\, keepsake\, or even a clothing item that needs to bee fixed? Bring it to the Shuswap Makerspace on Saturday\, November 1st to see if our volunteers can get it fixed!\n\n\n\nAll repairs are by donation.\n\n\n\nSaturday Feb 28\, 2026 from 10am-3pm at the Piccadilly 1151 10 Ave SW \, Salmon Arm BC V1E 1T3.\n\n\n\nIf you have any questions or concerns please reach out to us at\n778-404-1253 or send an email to\nshuswapmakerspacecoordinator@gmail.com
URL:https://shuswapmakerspace.ca/event/repair-cafe-4/
LOCATION:Piccadilly Mall\, 1151 10th AVE\, Salmon Arm\, British Columbia\, V1E 1T3\, Canada
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Repair-Cafe-Poster-FEb-26.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260305T090000
DTEND;TZID=America/Vancouver:20260305T150000
DTSTAMP:20260411T084307
CREATED:20260217T192556Z
LAST-MODIFIED:20260319T173806Z
UID:1477-1772701200-1772722800@shuswapmakerspace.ca
SUMMARY:CNC 101- Make a KITCHEN TRIVET and a CUSTOM SIGN -CANCELED
DESCRIPTION:Make a KITCHEN TRIVET and a CUSTOM SIGN \nIn this class you will learn how to operate the CNC machine in the Makerspace woodshop.\nYou will leave the class with 2 finished projects to use at home or give as gifts. Upon\ncompletion of this class you are certified to use the CNC on your own schedule if you are a\nmember. \nIn the morning session you will learn the CNC basics making a kitchen counter trivet. In the\nafternoon you will design and make a customized sign. \nInstructor: D. McLeod \nNumber of participants: 2 \n**Minimum of 2 Students to run the course** \nRequirements: Bring your laptop and a USB stick.\nMaterials: all are supplied\nDate: 9 AM–3PM Thursday March 5 2026-at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE\nCost $150 \nNote: basic computer skills are assumed; you are not expected to be an expert. If you can\nuse a web browser (Edge\, Safari\, Chrome\, Firefox) you have the computer skills needed\nfor this class. Bring a snack for a short lunch break before the afternoon session. \n  \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/cnc-101-make-a-kitchen-trivet-and-a-custom-sign/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop CNC 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/02/Intstructor-D.-McLeod-Number-of-participants-2-Requirements-Bring-your-laptop-and-a-USB-stick.-Materials-all-are-supplied-Date-9-AM–3PM-Thursday-March-5-2026-Cost-150-e1771356489441.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260307T090000
DTEND;TZID=America/Vancouver:20260307T150000
DTSTAMP:20260411T084307
CREATED:20260120T210243Z
LAST-MODIFIED:20260319T173513Z
UID:1357-1772874000-1772895600@shuswapmakerspace.ca
SUMMARY:Woodwork 101
DESCRIPTION:Woodshop 101 – Build A Lantern \n\nFamiliarize yourself with the Wood Shop and its resources.\nIntroduce yourself to the machines and power tools that you are most likely to use.\nDemonstrate how to use those machines and power tools safely.\nGet hands-on experience in operating the machines and power tools safely.\nLearn safety rules including\, E STOP\, first aid kit\, eye wash station\, fire extinguisher and emergency exits.\n\nThis workshop is led by Dave Crandell \nYou will make a lantern as part of the class and the wood is included in the cost. \nUpon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis! \nOpen to everyone 16 years and older \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle. \nSaturday March 7  9am-3pm  (1 hour lunch break)\,  at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nCheck out our memberships and everything Shuswap Makerspace here. \n\n\n\n\n Add to calendar
URL:https://shuswapmakerspace.ca/event/woodwork-101/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Brown-Woodworking-Workshop-Instagram-Post-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260308T090000
DTEND;TZID=America/Vancouver:20260309T203000
DTSTAMP:20260411T084307
CREATED:20260114T190721Z
LAST-MODIFIED:20260319T171112Z
UID:1290-1772960400-1773088200@shuswapmakerspace.ca
SUMMARY:Laser Cutter 101 Course- Cancelled
DESCRIPTION:LASER CUTTER 101 COURSE \n \n– 2 Part Series – \nSunday March 8\, 2026 9am-2:30pm / Monday 9\, 2026 6pm-8:30pm. \nHere’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine\, and learn all the capabilities of this amazing tool. What are you going to create?! \n  \nSession 1 – 6 hours with an hour break for lunch \n-In this class\, you will learn the basics of the machine\, safe operation\, and designing for the laser. Knowledge with Windows is required\, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice. \nSession 2 – 2 hours \n-In this second session you will use the laser to print out a project that you have designed for yourself. \n  \n**This is a certification class\, so once complete\, you can create your own projects and use the space on a drop-in\, monthly\, or annual membership basis! \nThis workshop is led by Carl Flatman \n  \nThis course runs over 2 days – Sunday March 8\, 2026 9am-2:30pm / Monday 9\, 2026 6pm-8:30pm. \n  \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux.
URL:https://shuswapmakerspace.ca/event/laser-cutter-101-course/
CATEGORIES:Laser Cutter 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Laser-Cutter-101-11-x-8.5-in-e1771979724183.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260314T100000
DTEND;TZID=America/Vancouver:20260314T140000
DTSTAMP:20260411T084307
CREATED:20260225T003113Z
LAST-MODIFIED:20260319T170930Z
UID:1504-1773482400-1773496800@shuswapmakerspace.ca
SUMMARY:Pen Making 101-Cancelled
DESCRIPTION:In this course you will make a “’Maple Leaf” style twist pen. \nThe activities are:\n prepare a wooden blank which will become the pen barrel\n turn a pen barrel blank on the lathe to the desired shape\n finish the wooden pen barrel to a smooth\, sheer look and feel\n assemble the finished pen\n find resources and supplies for more pen projects \nEach participant will leave the workshop with a finished Maple Leaf style pen.\nIn this class you will learn how to safely operate the lathe as an introduction to this fun hobby.\nAll materials are included in the cost. \nInstructor: D. McLeod \nNumber of participants: 2\nDate: Saturday March 14 2026; 10AM-2PM\nCost $80 \nYou might want to bring a lunch or snack for a short break during the workshop. Please no\nloose\, “dangly” style shirt sleeves. \nThis is 14 year old Lucas showing off the pen he made. He\nhad never touched a lathe before the class. \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nCheck out our memberships and everything Shuswap Makerspace here.
URL:https://shuswapmakerspace.ca/event/pen-making-101/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop Pen Making 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/02/Pen-Making-Poster-Ready-2026-1-e1771979030317.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260317T130000
DTEND;TZID=America/Vancouver:20260319T160000
DTSTAMP:20260411T084307
CREATED:20260219T011201Z
LAST-MODIFIED:20260319T170358Z
UID:1490-1773752400-1773936000@shuswapmakerspace.ca
SUMMARY:SPRING BREAK ****3D Printing Design**** SOLD OUT
DESCRIPTION:Day 1: Intro to 3D Printing – Covers the basics of printer operation and safety. Completion would act as the Makerspace 101 course for our printers.\nDay 2: Intro to CAD – A hands-on dive into Onshape\, focusing on basic geometry and part design fundamentals.\nDay 3: Design for Manufacturing – Students will design a container or custom part\, applying specific “Design for 3D Printing” techniques.\n\nThe fee is $225. Ages 10+ (Note: Youth members must be 12+ to purchase a Makerspace Membership).\n\nDate: March 17\,18\,19  (Tues\, Wed\, Thurs).\nTime: 1:00 PM – 4:00 PM (3 hours per session).The Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.***Register soon as space is limited to 4 people!*****Minimum of 4 Students to run the course**\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/spring-break-3d-printing-design/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:3D printing Design
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/02/Spring-Break-3D-Printing-e1771463485506.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260322T090000
DTEND;TZID=America/Vancouver:20260324T203000
DTSTAMP:20260411T084307
CREATED:20260114T193539Z
LAST-MODIFIED:20260319T165842Z
UID:1297-1774170000-1774384200@shuswapmakerspace.ca
SUMMARY:Laser Cutter 101 Course - 2 Part Series
DESCRIPTION:Laser Cutter 101 Course \n \n  -2 Part Series-  \nSunday March 22\, 2026 9am-2:30pm / Tuesday 24\, 2026 6pm-8:30pm. \nHere’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine\, and learn all the capabilities of this amazing tool. What are you going to create?! \n  \nSession 1 – 6 hours with an hour break for lunch \n-In this class\, you will learn the basics of the machine\, safe operation\, and designing for the laser. Knowledge with Windows is required\, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice. \nSession 2 – 2 hours \n-In this second session you will use the laser to print out a project that you have designed for yourself. \n  \n**This is a certification class\, so once complete\, you can create your own projects and use the space on a drop-in\, monthly\, or annual membership basis! \nThis workshop is led by Carl Flatman \nThis course runs over 2 days – Sunday March 22\, 2026 9am-2:30pm / Tuesday 24\, 2026 6pm-8:30pm. \n  \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux.
URL:https://shuswapmakerspace.ca/event/laser-cutter-101-course-2/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Laser Cutter 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Laser-Cutter-101-11-x-8.5-in-1-1-e1771979609524.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260324T093000
DTEND;TZID=America/Vancouver:20260324T113000
DTSTAMP:20260411T084307
CREATED:20260203T215220Z
LAST-MODIFIED:20260319T170107Z
UID:1459-1774344600-1774351800@shuswapmakerspace.ca
SUMMARY:Spring Break Fun: Sewing Bag! 🎨🌸
DESCRIPTION:🌸🎨 Spring Break Fun: BAG MAKING! At Shuswap Makerspace \nTuesday:   March 24 – Sewing Bag & Decal \n⏰ 9:30 AM – 11:30 AM📍 Shuswap Makerspace \n✨ Bring a friend🎨 All materials included😊 No experience needed \nA fun\, relaxed way to create\, make new friends and perfect for a Spring Break memory! \nPre-registration is required. \n*****The class runs March 24\, 2026 at the Shuswap Makerspace\,  9:30am–11:30am**** \nLocated at 220 Shuswap St. NE Salmon Arm\, BC. Bottom of the brightly colored Innovation Center. \nLimit of 4 people per Session. (Minimum of 2 people to run the class) \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/spring-break-fun-watercolor-painting-%f0%9f%8e%a8%f0%9f%8c%b8/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Sewing 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/02/🌸🎨-Spring-Break-Fun-Watercolor-Painting-🎨🌸-At-Shuswap-Makerspace-3-e1773086941194.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260324T130000
DTEND;TZID=America/Vancouver:20260324T143000
DTSTAMP:20260411T084307
CREATED:20260306T203857Z
LAST-MODIFIED:20260319T165233Z
UID:1530-1774357200-1774362600@shuswapmakerspace.ca
SUMMARY:Build Your Own Birdhouse – Two Unique Designs- Spring Break!
DESCRIPTION:Get ready for a hands-on\, giggle-filled workshop where creativity and nature come together! Kids will have a blast building their very own suet feeder\, learning how to help local birds\, and getting a little messy along the way. With simple tools\, fun materials\, and lots of encouragement\, this workshop is all about making\, learning\, and feeling proud of something they can take home and use right away. Perfect for curious kids who love to create and care for nature.  \n\n  \nPick two different bird house to make and bring home. \nAges: 8-15 Years old \n******Pre-registration is required.***** \nThis class will take place March 24 2026 – 1pm-2:30pm at the Shuswap Makerspace. \nLocated at 220 Shuswap St. NE Salmon Arm\, BC. Bottom of the brightly colored Innovation Center. \n**Limit of  15 people. (Minimum of 10 people to run the class) \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/build-your-own-birdhouse-two-unique-designs-spring-break/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop Bird house
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/Bird-House-March-24-e1772829777562.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260401T180000
DTEND;TZID=America/Vancouver:20260401T203000
DTSTAMP:20260411T084307
CREATED:20260318T201335Z
LAST-MODIFIED:20260331T181636Z
UID:1580-1775066400-1775075400@shuswapmakerspace.ca
SUMMARY:Metal Lathe 101- 3-Day Workshop Series
DESCRIPTION:Metal Lathe 101 certification course is designed for home hobbyists\, technicians\, or persons doing small repair work. \nIf you have always wanted to learn to make your own parts on a metal lathe\, this course is a good start. If you are thinking of getting a lathe or already have a lathe but need some guidance\, this course will teach you proper use\, help familiarize you with related terminology\, and give you a better understanding of the metal lathe’s capabilities. \nIntroduction to the Metal Lathe will include\, but is not limited to: \n\nShop safety\nLathe basics\nCutting tools and techniques\nCutting speeds and feeds\n\nThis course will be a prerequisite for other metal lathe courses and is the certification course for unsupervised use of the lathe in the Shuswap Makerspace. Please wear closed-toe shoes\, have hair tied back\, and avoid loose clothing and jewelry. \nThe course has 3 modules: Introduction to the metal lathe\, basic drilling and tapping\, basic threading\, and other operations. \nInstructor: Pat Shea \nCost: $225 \nAges: 16 & up \nThis course runs over 3 days –Wednesday 1/8/15 2026 6:00pm-8:30pm. \nRegister soon as space is limited to 3 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux. \n 
URL:https://shuswapmakerspace.ca/event/metal-lathe-101-2/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Metal Lathe 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/01/Metal-Lathe-101-2-e1773864771581.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260409T180000
DTEND;TZID=America/Vancouver:20260409T200000
DTSTAMP:20260411T084307
CREATED:20260324T212140Z
LAST-MODIFIED:20260331T173037Z
UID:1652-1775757600-1775764800@shuswapmakerspace.ca
SUMMARY:Clothing Repair Class
DESCRIPTION:Have you ever wanted to hem your own pants? Mend rips in clothing? How about the best way to sew on a button or a patch?\nRegister now to spend a morning with our experienced sewing teacher. We will learn how to sew on buttons\, hem up pants or skirts\, fix a torn seam\, repair snags in sweaters\, darn over a hole or cover it with decorative patches\, appliques or embroidery stitches. \nBring some clothing that needs mending and let us see what we can do with it! \n*NOTE: We are not doing clothing alterations (changing the design or size to make it fit the body). \nApril 9\, Thursday evening\, 6:00 – 8:00 \nAge: 12+ \nShuswap Makerspace 220 Shuswap St. NE\, Salmon Arm\,  in the Innovation Centre (basement) \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day! \n 
URL:https://shuswapmakerspace.ca/event/memory-maker-clothing-repair-class/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Clothing Repair Class
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/30-per-duo-2-e1774464795509.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260416T160000
DTEND;TZID=America/Vancouver:20260416T190000
DTSTAMP:20260411T084307
CREATED:20260324T201745Z
LAST-MODIFIED:20260324T201745Z
UID:1633-1776355200-1776366000@shuswapmakerspace.ca
SUMMARY:Adult 3D Intro Course
DESCRIPTION:~ Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers utilizing our memberships and drop in. \n\nThis workshop is led by electronics enthusiast Kyrel Silva.\n\nThe fee is $100. Adults 16+(Note: Youth members must be 12+ to purchase a Makerspace Membership). \nThursday\, April 16  4PM – 7PM at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 4 people!*** \n**Minimum of 4 Students to run the course** \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/adult-3d-intro-course/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:3D printing 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/Your-paragAdult-3D-Printing-Course-Date-April-16th-Time4pm-7pm-Location-MakerSpace-220-Shuswap-St-NE-1-e1774383285269.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260418T090000
DTEND;TZID=America/Vancouver:20260418T150000
DTSTAMP:20260411T084307
CREATED:20260325T204802Z
LAST-MODIFIED:20260325T204802Z
UID:1665-1776502800-1776524400@shuswapmakerspace.ca
SUMMARY:Memory Maker - Jewel Box
DESCRIPTION:Memory Makers program – WOODSHOP Project\nThis program is set up for a senior (55+) and a youth (under 16) to take a class and build a project together for one low cost! Perfect for Grandparents and grandchildren\, Aunts/Uncles with Nieces/Nephews\, or even your favorite neighbor from down the road! \nStreamlined Cedar Jewel Box –‘ Designed to Flow with’- 21st Century Furniture of ‘Straight Lined Low Profile Dimensions’. This is a course for the memory maker program. Enjoy as the Instructor Guides you through All Construction and Finishing Phases – Including ‘SAFETY’ as you work. \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied back. \n  \nShuswap Makerspace 220 Shuswap St. NE\, Salmon Arm\,  in the Innovation Centre (basement) \n***Register soon as space is limited to 4 senior/youth couples!*** Minimum 2 senior/youth couples to run the course \n  \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day! \n 
URL:https://shuswapmakerspace.ca/event/memory-maker-jewel-box/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Memory Makers
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/40-per-Duo-e1774470995263.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260419T090000
DTEND;TZID=America/Vancouver:20260420T203000
DTSTAMP:20260411T084307
CREATED:20260319T205839Z
LAST-MODIFIED:20260331T201128Z
UID:1613-1776589200-1776717000@shuswapmakerspace.ca
SUMMARY:Laser Cutter 101 Course
DESCRIPTION:  -2 Part Series-  \nSunday April 19\, 2026 9am-2:30pm / Monday April  20\, 2026 6pm-8:30pm. \nHere’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine\, and learn all the capabilities of this amazing tool. What are you going to create?! \n  \nSession 1 – 6 hours with an hour break for lunch \n-In this class\, you will learn the basics of the machine\, safe operation\, and designing for the laser. Knowledge with Windows is required\, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice. \nSession 2 – 2 hours \n-In this second session you will use the laser to print out a project that you have designed for yourself. \n  \n**This is a certification class\, so once complete\, you can create your own projects and use the space on a drop-in\, monthly\, or annual membership basis! \nThis workshop is led by Carl Flatman \nThis course runs over 2 days – Sunday April 19\, 2026 9am-2:30pm / Monday April 20th\, 2026 6pm-8:30pm. \n  \nRegister soon as space is limited to 4 people. \n*Minimum 2 people to run the course.* \nPlease Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later\, 32 or 64 bit\, MacOS 10.11 or later\, or 64 bit Linux.
URL:https://shuswapmakerspace.ca/event/laser-cutter-101-course-3/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Laser Cutter 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/Laser-Cutter-101-11-x-8.5-in-3-e1773953865865.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260421T093000
DTEND;TZID=America/Vancouver:20260421T113000
DTSTAMP:20260411T084307
CREATED:20260325T210506Z
LAST-MODIFIED:20260330T183953Z
UID:1670-1776763800-1776771000@shuswapmakerspace.ca
SUMMARY:Clothing Repair Class
DESCRIPTION:Have you ever wanted to hem your own pants? Mend rips in clothing? How about the best way to sew on a button or a patch?\nRegister now to spend a morning with our experienced sewing teacher. We will learn how to sew on buttons\, hem up pants or skirts\, fix a torn seam\, repair snags in sweaters\, darn over a hole or cover it with decorative patches\, appliques or embroidery stitches. \nBring some clothing that needs mending and let us see what we can do with it! \n*NOTE: We are not doing clothing alterations (changing the design or size to make it fit the body). \nApril 21\, Tuesday Morning\, 9:30am-11:30am \nAge: 12+ \nShuswap Makerspace 220 Shuswap St. NE\, Salmon Arm\,  in the Innovation Centre (basement) \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day! \n 
URL:https://shuswapmakerspace.ca/event/clothing-repair-class/
CATEGORIES:Clothing Repair Class
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/30-per-duo-3-e1774472475715.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260425T090000
DTEND;TZID=America/Vancouver:20260425T150000
DTSTAMP:20260411T084307
CREATED:20260318T212213Z
LAST-MODIFIED:20260319T184337Z
UID:1586-1777107600-1777129200@shuswapmakerspace.ca
SUMMARY:Woodwork 101 Course
DESCRIPTION:Woodshop 101 – Build A Lantern \n\nFamiliarize yourself with the Wood Shop and its resources.\nIntroduce yourself to the machines and power tools that you are most likely to use.\nDemonstrate how to use those machines and power tools safely.\nGet hands-on experience in operating the machines and power tools safely.\nLearn safety rules including\, E STOP\, first aid kit\, eye wash station\, fire extinguisher and emergency exits.\n\nThis workshop is led by Dave Crandell \nYou will make a lantern as part of the class and the wood is included in the cost. \nUpon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis! \nOpen to everyone 16 years and older \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle. \nSaturday April 25\, 2026 9am-3pm  (1 hour lunch break)\,  at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nCheck out our memberships and everything Shuswap Makerspace here
URL:https://shuswapmakerspace.ca/event/woodwork-101-course/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/DATE-Saturday-April-25-TIME-9am-330pm-LOCATION-220-Shuswap-ST-NE-Shuswap-Makerspace-e1773868842628.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260502T090000
DTEND;TZID=America/Vancouver:20260502T150000
DTSTAMP:20260411T084307
CREATED:20260319T201936Z
LAST-MODIFIED:20260325T181644Z
UID:1604-1777712400-1777734000@shuswapmakerspace.ca
SUMMARY:Woodwork 101 Course
DESCRIPTION:Woodshop 101 – Build A Lantern \n\nFamiliarize yourself with the Wood Shop and its resources.\nIntroduce yourself to the machines and power tools that you are most likely to use.\nDemonstrate how to use those machines and power tools safely.\nGet hands-on experience in operating the machines and power tools safely.\nLearn safety rules including\, E STOP\, first aid kit\, eye wash station\, fire extinguisher and emergency exits.\n\nThis workshop is led by Dave Crandell \nYou will make a lantern as part of the class and the wood is included in the cost. \nUpon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis! \nOpen to everyone 16 years and older \nNOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle. \nSaturday May 2\, 2026 9am-3pm  (1 hour lunch break)\,  at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course \nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events! \nCheck out our memberships and everything Shuswap Makerspace here
URL:https://shuswapmakerspace.ca/event/1604/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:Woodshop 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/DATE-Saturday-April-25-TIME-9am-330pm-LOCATION-220-Shuswap-ST-NE-Shuswap-Makerspace-1-e1773951357697.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260514T160000
DTEND;TZID=America/Vancouver:20260514T190000
DTSTAMP:20260411T084307
CREATED:20260324T203006Z
LAST-MODIFIED:20260325T194444Z
UID:1644-1778774400-1778785200@shuswapmakerspace.ca
SUMMARY:Kids 3D Intro Course
DESCRIPTION:~ Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers utilizing our memberships and drop in. \n\nThis workshop is led by electronics enthusiast Kyrel Silva.\n\nThe fee is $100. Kids 8+(Note: Youth members must be 12+ to purchase a Makerspace Membership). \nThursday\, May 14  4PM – 7PM at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE. \n***Register soon as space is limited to 4 people!*** \n**Minimum of 4 Students to run the course** \n\nSubscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!\nSign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
URL:https://shuswapmakerspace.ca/event/kids-3d-intro-course/
LOCATION:Shuswap Makerspace\, 220 Shuswap Street NE\, Salmon Arm\, BC\, V1E 4N2\, Canada
CATEGORIES:3D printing 101
ATTACH;FMTTYPE=image/png:https://shuswapmakerspace.ca/wp-content/uploads/2026/03/Your-paragAdult-3D-Printing-Course-Date-April-16th-Time4pm-7pm-Location-MakerSpace-220-Shuswap-St-NE-4-e1774384091188.png
END:VEVENT
END:VCALENDAR