Shuswap Makerspace

Memory Makers - Build A Birdhouse
2025-10-04 10:00 - 13:00 (America/Vancouver) | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Memory Makers program – Build A Birdhouse!
This program is set up for a senior (55+) and a youth (under 16) to take a class and build a project together for one low cost! Perfect for Grandparents and grandchildren, Aunts/Uncles with Nieces/Nephews, or even your favorite neighbor from down the road!

For this project you will be in the woodshop building a Birdhouse kit together! Fall time is a great time to put up a birdhouse as it serves as an important shelter for roosting and protection from predators and winter weather. These birdhouses are built very well to last the winter weather and are the same ones that you see on the Salmon Arm bird trail!
Open to youth 6-16 & seniors over 55.
Introduce your youth to the art of woodwork.
No major power tools or equipment will be used for this class. You will mainly be sanding and nailing. You will also get to personalize it using the laser cutter!
All supplies are included.
Saturday October 4th from 10am-1pm

Shuswap Makerspace 220 Shuswap St. NE, Salmon Arm, in the Innovation Centre (basement)
***Register soon as space is limited to 4 senior/youth couples!*** Minimum 2 senior/youth couples to run the course

Subscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!
Sign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!

Pro D Day Class - Build a Toy Truck!
2025-09-29 10:00 - 12:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Pro-D Day Class – Build A Toy Truck!

🚨Attention Parents🚨 – Are you looking for something to keep the kids busy for a couple hours on the ProD day this Monday?🙋‍♀️
Register them for a fun class building a toy truck!🚛
📌WHEN? – Monday September 29th from 10am-noon
📌WHERE? – Shuswap Makerspace – 220 Shuswap St. NE Salmon Arm (Bottom of the brightly colored Salmon Arm Innovation Centre)🦋
📌WHO? – Class is suitable for ages 7-12
📌WHAT? – Youth will choose 1 of 4 options of toy trucks to build and paint.
📌HOW MUCH? – $20👌

Intro to 3D Printing
2025-09-25 16:00 - 19:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
INTRO TO 3-D PRINTING:

~ Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers utilizing our memberships and drop in.

This workshop is led by electronics enthusiast Kyrel Silva.

The fee is $100. Ages 10+ (Note: Youth members must be 12+ to purchase a Makerspace Membership).
Thursday, September 25th from 4PM – 7PM at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.
***Register soon as space is limited to 4 people!***
**Minimum of 3 Students to run the course**

Subscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!
Sign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!

Woodshop 101
2025-09-20 09:00 - 16:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
WOODSHOP 101

Woodshop 101 – Build A Step Stool

Familiarize yourself with the Wood Shop and its resources.
Introduce yourself to the machines and power tools that you are most likely to use.
Demonstrate how to use those machines and power tools safely.
Get hands-on experience in operating the machines and power tools safely.
Learn safety rules including, E STOP, first aid kit, eye wash station, fire extinguisher and emergency exits.

This workshop is led by retired cabinet maker and wood craftsperson, Ed Campbell.
You will make a small step stool as part of the class and the wood is included in the cost.
Upon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis!
Open to everyone 16 years and older
NOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle.
Saturday September 20th, from 9am-4pm (1 hour lunch break), at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.
***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course
Subscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!
Check out our memberships and everything Shuswap Makerspace here.

Repair Cafe @ Piccadilly Mall
2025-08-16 10:00 - 15:00 | Piccadilly Mall, 1151 10th AVE, Salmon Arm, British Columbia, V1E 1T3, Canada
Mark your calendars for the next Repair Cafe!

~Toss it? No way!~

Do you have a broken lamp, small appliance, keepsake, or even a clothing item that needs to bee fixed? Bring it by the Piccadilly Place Mall on August 16th to see if our volunteers can get it fixed!

All repairs are by donation.

Saturday August 16th from 10am-3pm at the Piccadilly Place Mall – 1151 10th ave Salmon Arm.

If you have any questions or concerns please reach out to us at
778-404-1253 or send an email to
shuswapmakerspacecoordinator@gmail.com

Youth Summer Series - Week #3
2025-08-11 09:00 - 2025-08-14 15:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Summer is coming up quick!Keep the kids occupied and engaged this summer with our Youth Summer Series!Woodwork, arts and crafts, sewing, kits, and more!
All activities will be suited to the age of the participants.Classes run Monday to Thursday 9am-3pm
Week #3 – August 11th – August 15thAges 9-15

*Please bring a water bottle and lunch
*Limited to 4 participants so register soon.
**Minimum of 3 participants to run this program

Private Laser Class
2025-08-07 09:00 - 16:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
The woodshop and Laser room will be closed to the public on this day due to a private workshop.

For information on how to book a private workshop for you (minimum of 2 and maximum of 4 people), reach out to our coordinator at shuswapmakerspacecoordinator@gmail.com or call us at 778-404-1253.

Youth Summer Series Week #2
2025-07-21 09:00 - 2025-07-24 15:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Summer is coming up quick!Keep the kids occupied and engaged this summer with our Youth Summer Series!Woodwork, arts and crafts, sewing, kits, and more!
All activities will be suited to the age of the participants.Classes run Monday to Thursday 9am-3pm
Week #2- July 21st-24thAges 9-15

*Please bring a water bottle and lunch
*Limited to 4 participants so register soon.
**Minimum of 3 participants to run this program

Youth Summer Series Week #1
2025-07-14 09:00 - 2025-07-17 15:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Summer is coming up quick!Keep the kids occupied and engaged this summer with our Youth Summer Series!Woodwork, arts and crafts, sewing, kits, and more!
All activities will be suited to the age of the participants.Classes run Monday to Thursday 9am-3pm
Week #1 – July 14th-17thAges 9-15

*Please bring a water bottle and lunch
*Limited to 4 participants so register soon.
**Minimum of 3 participants to run this program

Woodshop 101
2025-06-28 09:00 - 16:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Woodshop 101 – Build A Step Stool

Familiarize yourself with the Wood Shop and its resources.
Introduce yourself to the machines and power tools that you are most likely to use.
Demonstrate how to use those machines and power tools safely.
Get hands-on experience in operating the machines and power tools safely.
Learn safety rules including, E STOP, first aid kit, eye wash station, fire extinguisher and emergency exits.

This workshop is led by retired cabinet maker and wood craftsperson, Ed Campbell.
You will make a small step stool as part of the class and the wood is included in the cost.
Upon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis!
Open to everyone 16 years and older
NOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle.
Saturday June 28th, from 9am-4pm (1 hour lunch break), at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.
***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course

Woodshop Clean Up
2025-06-23 19:00 - 20:30 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
The Shuswap Makerspace is holding a semi annual ‘Big Shop Clean Up’ evening, June 23rd from 7pm-8:30pm!

As a non profit, shared use space, we encourage all members to drop by and lend a helping hand. The more helping hands the quicker it will be!

This is a perfect opportunity to give you, our members, a sense of ownership and pride in the woodshop, seeing exactly what goes into keeping the shop in a clean, usable manner for all the members to enjoy. Remember, this space is only as good as we keep it! (And we think its pretty great!)

Registration is not required, just come with closed toed footwear and ready to lend a helping hand!

Refreshments will be provided.

Private Class
2025-06-22 12:00 - 16:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
The multi purpose room is booked for this day for a private Stained Glass class. This class is NOT open to the public.

Would you like to book a private class with a few of your friends? Reach out to us at shuswapmakerspacecoordinator@gmail.com for more information.

Intro To 3D Printing
2025-06-19 16:00 - 19:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
INTRO TO 3-D PRINTING:
~ Learn the basics of 3D printing and how to safely and successfully use the 3D printers and software to print your own 3D objects. This course is a requirement for gaining access to the 3D printers, and being able to utilize them for your own projects thereafter on a memberships or drop in basis.

This workshop is led by Kyrel Silva.

The fee is $100. Ages 10+ (Note: Youth members must be 12+ to purchase a Makerspace Membership). This class is suitable for ALL ages
Thursday June 19th from 4PM – 7PM at the Shuswap Makerspace, Located at 220 Shuswap St. NE Salmon Arm (Bottom of the brightly colored Innovation Center!)
***Register soon as space is limited to 4 people!***
**Minimum of 3 Students to run the course**

Father's Day Fix It Event at the Piccadilly Mall
2025-06-14 10:00 - 15:00 | Piccadilly Mall, 1151 10th AVE, Salmon Arm, British Columbia, V1E 1T3, Canada
Come on down to Piccadilly Mall in Salmon Arm on Saturday, June 14th from 10am-3pm, for the Father’s Day Fix It event!

Bring a simple electrical item that needs fixed and learn how to repair it with Dad!

Prefer to build something at home? Wooden DIY kits will be available for purchase!

Have a regular item for repair? Bring it by and see if our volunteers have time to get it fixed for you!
(This will be dependent on how busy the volunteers are with the Father’s Day event and may not be ready for pick up that same day.)

Registration is not required. All repairs are by donation.

DIY kits range from $20-$30

Get an entry ticket to the Piccadilly Mall 30th anniversary giveaway!

Our table will be set up in front of Best Buy Express (formerly the Source)

Intro to Stained Glass
2025-05-31 13:00 - 17:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Intro to Stained Glass!

Each student will make a simple sun catcher that will have between 6 and 12 pieces. There will be 4 designs to choose from.
The instructor will show students basic glass cutting techniques and various cutting methods for their sun catcher.
You will learn how to prepare the edges for foil tape and how to tack pieces in place over the pattern on the work surface; as well as how to apply the solder and patina.

You will need to bring a pair of ‘high dexterity’ gloves for yourself. – These can be purchased at many local stores (Dollarama, Canadian Tire, Walmart, any hardware or gardening store)

All other supplies and tools are included in the course.

This workshop is led by retired electrician and stained glassenthusiast, Jim Hilland.
NOTE:We ask that you wear closed-toed shoes. Long hair must be tied up.
Saturday,May 31st at the Shuswap Makerspace, bottom of the Innovation Centre (basement) 220 Shuswap St. NE.

***Register soon as space is limited to 4 people!***

Make a folding Adirondack Chair!
2025-05-31 09:00 - 2025-06-01 13:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Build your very own FOLDING ADIRONDAK chair at the Shuswap Makerspace, and get certified for using the Woodshop!

This 2 day class is a fully instructed course that will have you building a beautiful, folding Adirondack chair. Not only will it be lightweight and last a long time, but you’ll be able to fold it for easy storage! This chair will be made out of fir.
Led by instructor Ed Campbell, this course also includes your Woodshop 101 certification. You will learn how to use most of the tools in the woodshop, with an emphasis on safety and proper use of equipment. Once complete you will be certified to utilize our woodshop on a membership or drop in basis for your personal projects! (All personal projects will require you to bring your own wood. However all supplies are included for this Course.)
The cost is $240 for ages 16 & up.
Saturday May 31st from 9am – 4pm & Sunday, June 1st from 10am – 1pm at the Shuswap Makerspace 220 Shuswap St. NE Salmon Arm (Bottom of the brightly colored Innovation Centre)
**Register soon as space is limited to 2 people! Minimum 2 people to run the course.**
NOTE: Please wear closed-toed shoes with long hair pulled back. And bring a water bottle and lunch as we break for an hour lunch break for the first session.

Intro to Sewing for Adults
2025-05-15 09:30 - 12:30 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
“Intro to Sewing for Adults”
Instructor – Linda Wooster, retired Home Economics teacher and award-winning seamstress
In this class you will …
… learn the parts of a sewing machine and what each part does
… practice using the machine to sew straight seams
… construct a simple shopping bag from rough linen fabric
… decorate the bag with an iron-on applique (either ‘Lone Star’ or simple silhouette)
All materials and sewing machines will be provided.
Open to Ages 16+
Pre-registration is required.

**This class will take place Thursday, May 15th from 930am-1230pm at the Shuswap Makerspace.
Located at 220 Shuswap St. NE Salmon Arm, BC. Bottom of the brightly colored Innovation Center.
**Limit of 3 people. (Minimum of 2 people to run the class)

Repair Cafe
2025-05-10 10:00 - 15:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Shuswap Makerspace is having a REPAIR CAFE on Saturday, May 10th from 10am – 3pm.

Bring your broken small appliances, lamps, vacuums, small wooden items, and even clothing/textiles!
Registration not required
Don’t all come at 10am or you’ll be waiting
All by donation
Let’s keep things out of the landfill!
Toss it, no way!

For more information give us a call at 778-404-1253 or email shuswapmakerspacecoordinator@gmail.com

Laser Cutter 101
2025-04-27 09:00 - 15:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
LASER CUTTER 101 COURSE
– 2 Part Series –
Sunday April 27th 9am-3pm & Tuesday April 29th 6pm-8pm

Here’s your chance to learn more about this exciting piece of machinery at the Shuswap Makerspace! Come and get certified to use our 100-Watt HL 1060 Laser Cutting / Engraving machine, and learn all the capabilities of this amazing tool. What are you going to create?!

Session 1 – 6 hours with an hour break for lunch
-In this class, you will learn the basics of the machine, safe operation, and designing for the laser. Knowledge with Windows is required, and there is software that can be downloaded on your personal computer to prepare your files for the laser. You will learn how to design and then use the laser cutter to cut out the project of instructors choice.
Session 2 – 2 hours
-In this second session you will use the laser to print out a project that you have designed for yourself.

**This is a certification class, so once complete, you can create your own projects and use the space on a drop-in, monthly, or annual membership basis!
This workshop is led by Pat Shea

This course runs over 2 days – Sunday April 27th 9am-3pm AND Tuesday April 29th 6pm-8pm

Register soon as space is limited to 4 people.
*Minimum 2 people to run the course.*
Please Note: You will also need a laptop and usb stick. LightBurn software will run on Windows 7.0 or later, 32 or 64 bit, MacOS 10.11 or later, or 64 bit Linux.

Woodshop 101
2025-04-26 09:00 - 16:00 | Shuswap Makerspace, 220 Shuswap Street NE, Salmon Arm, BC, V1E 4N2, Canada
Woodshop 101 – Build A Step Stool

Familiarize yourself with the Wood Shop and its resources.
Introduce yourself to the machines and power tools that you are most likely to use.
Demonstrate how to use those machines and power tools safely.
Get hands-on experience in operating the machines and power tools safely.
Learn safety rules including, E STOP, first aid kit, eye wash station, fire extinguisher and emergency exits.

This workshop is led by retired cabinet maker and wood craftsperson, Ed Campbell.
You will make a small step stool as part of the class and the wood is included in the cost.
Upon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis!
Open to everyone 16 years and older
NOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle.
Saturday April 26th, from 9am-4pm (1 hour lunch break), at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.
***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course

Intro to Sewing for Adults
2025-04-17 09:30 - 12:30 | BC
Instructor – Linda Wooster, retired Home Economics teacher and award-winning seamstress
In this class you will …
… learn the parts of a sewing machine and what each part does
… practice using the machine to sew straight seams
… construct a simple shopping bag from rough linen fabric
… decorate the bag with an iron-on applique (either ‘Lone Star’ or simple silhouette)
All materials and sewing machines will be provided.
Open to Ages 16+
Pre-registration is required.
**This class will take place Thursday, April 17th from 930am-1230pm at the Shuswap Makerspace.
Located at 220 Shuswap St. NE Salmon Arm, BC. Bottom of the brightly colored Innovation Center.
**Limit of 3 people. (Minimum of 2 people to run the class)

Subscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!
Sign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the space every day!

Woodshop 101
2025-04-12 09:00 - 16:00 | BC
Woodshop 101 – Build A Step Stool

Familiarize yourself with the Wood Shop and its resources.
Introduce yourself to the machines and power tools that you are most likely to use.
Demonstrate how to use those machines and power tools safely.
Get hands-on experience in operating the machines and power tools safely.
Learn safety rules including, E STOP, first aid kit, eye wash station, fire extinguisher and emergency exits.

This workshop is led by retired cabinet maker and wood craftsperson, Ed Campbell.
You will make a small step stool as part of the class and the wood is included in the cost.
Upon Completion of this class you will then be able to utilize the woodshop for your own projects on a membership or drop in basis!
Open to everyone 16 years and older
NOTE: We ask that you wear closed-toed shoes. Long hair must be tied up. Please bring a lunch and a water bottle.
Saturday March 29th, from 9am-4pm (1 hour lunch break), at the Shuswap Makerspace in the Innovation Centre (basement) 220 Shuswap St. NE.
***Register soon as space is limited to 3 people!*** Minimum 2 people to run the course
Subscribe to our Shuswap Makerspace newsletter here to be first in line to sign up for events!
Sign up for a Shuswap Makerspace Annual or Monthly Membership Here and use the shop every day!
